Help, Comcast’s DNS is sucking again!

This past Sunday, if you lived in parts of the Midwest (I know IN & IL were on the list, but I don’t remember who all else) and have Crapcast Comcast as your ISP, you might have had problems surfing the tubes, because they were having trouble with their DNS servers again. News of this spread through Twitter (at least that’s how I heard about it since I wasn’t affected directly), in a bizarre twist of news-spreading similar to people sending email at work letting people know that the mail server is down… Obviously with smartphones & such this is still a good way to spread such information, but it still strikes me as a bit funny 😉

(I’m not going to go into what DNS is here. I assume most people reading this are already going to know what it is, what it’s for, and why it’s important, so I’m going to skip this whole part.)

The main way to take care of this is to set your machine to use other DNS servers. The usual suspects recommended during times like this are Google’s two public servers, aptly named google-public-dns-a and google-public-dns-b.google.com (-c resolves to a server, but its IP isn’t as easy to just remember (more on that in a sec). Or, it’s a Google honeypot for smarty pants 😀 ). There’s also OpenDNS servers, which apparently do a bunch of other stuff like redirecting you to the right place when you misspell something. I don’t really know how well this actually works or anything; this is just what their Wikipedia page says.

Google’s own page explaining how to set these up is a good reference for what to do if you don’t know. They’re pretty good instructions, so knock yourself out there. These servers’ IPs are 8.8.8.8 and 8.8.4.4, which are fairly easy to remember (and type), making it easy to set up on machines on-the-fly, which is important if you’re looking to set this up while DNS is down and you can’t get to google.com…

Here’s what I prefer to do

Google’s instructions are fine to set up a machine or two, but what if you’ve got half a dozen boxes in your house and/or you want a bit of a more robust solution? Glad you asked!

Most likely, the machines on your home network are serviced by your router’s built-in DHCP server. At the same time it provides the machines with IP addresses to use, it also provides them with one or two DNS servers. It should be getting these addresses from your ISP in basically the same way—it’s a DHCP client instead of a server on its external-facing port.

Obviously, under normal circumstances, your ISP is going to be providing their own DNS servers for this use, as it allows them to load custom search pages and stuff if they want to. (Did Comcast ever go through with doing that?) If your router supports it, however, you can override these settings, and that is where the more robust solution to this DNS problem comes in.

Somewhere in your router’s settings is probably a section called “Basic Setup”, “Basic Settings”, or something similar. This section will include things like the router’s name, authentication settings in case your ISP requires that, and possibly more advanced things like MAC address spoofing. What you’re looking for here is a section that refers to “Static” or “Manual” DNS servers like these:

WRT54G Settings

Old Linksys Settings screen

Netgear Settings Screen

Netgear Settings Screen

These are a couple of the routers that I have available to look at. The first one is an old Linksys WRT54G (if you aren’t actively using one of these at home…well…you have my sympathy) and the second one is our travel router, some random Netgear thing. These are the general settings areas that you’re looking for.

The main idea here is to put Google’s DNS servers’ IPs into those manual configuration boxes. You could forego your ISP servers altogether and just put in both of Google’s server and call it a day. However, for some reason, this strikes me as something that isn’t the best idea. I don’t have a real good reason for it, it’s just one of those things that doesn’t feel right. What I would do is to get one of your ISP’s DNS servers and put that in as your primary, then one of Google’s servers as the secondary (or tertiary, if you have an option for 3). That strikes me as a safer option, but there is one thing to keep in mind: If your ISP ever changes their DNS servers, since your settings are manually configured, that change won’t be made automatically like it otherwise would. Obviously if you’ve got one of Google’s servers in there, things will still work, but name resolution may be a bit slower if your machine picks the now-broken IP first and you have to wait for that to time out before it hits the second machine. This is just something to weigh; I don’t know that there’s a good reason to not just put Google’s DNS servers in there and go on with life, other than it’s almost definitely an “unsupported” configuration in your ISP’s eyes.

The reason I advocate this method of setup is simple: When you do this, these addresses will be passed on to your workstations when they get IPs to use from the router. This will happen for every machine that connects to your network, so you only need to set this up once to use these other servers.

While you’re in here messing around, it is important to leave the router set to get its external IP via DHCP or whatever else your ISP has told you it needs to be set to. If you do this, then things will work OK for now, but at some time in the near future, it’s probable that things will stop working altogether. If you can’t manually set your DNS servers without leaving the IP address on Automatic/DHCP, then you won’t be able to set DNS up this way, and you’ll need to use Google’s instructions to set each of your machines individually.

Nutjob solution

Or, forget all this, run your own DNS server, point it at the Root Hint servers, and thumb your nose at Comcast’s inability to do simple things like keep some DNS servers happy.

I have no idea who would do such crazy things, though <.< >.>

Unbeknownst to them, Soutwest has a SQL Saturday hookup!

Being the Southwest fanbois that we are, I wanted to bring y’all this PSA 🙂

Winglet!

Everyone loves winglets. OK, maybe not everyone.

They’ve got a sale going on until the end of October 28 (tomorrow) Pacific Time where you can get flights for $30 if you’re going < 450 miles. They go up from there, but the prices are still pretty good.

The windows for the flights are December 1-15 and January 4-February 16. There are FIVE (5) whole SQL Saturdays within those two windows!

  • Dec 4, #61 in DC
  • Jan 15, #62 in Tampa
  • Jan 22, #45 in Louisville
  • Jan 29, #57 in Houston
  • Feb 5, #60 in Cleveland

Sooooo, if you’re wanting to hit up more SQL Saturdays or are speaking at one of those and have to foot the bill yourself, this might be a slightly cheaper way to pull it off.

…You know, if you don’t mind being stuffed in the back of a 737-700.

Edit: Forgot to put the direct link to their page that lists all of the covered cities/destinations: clicky